SSDs vs HDDs
Examine the 2 industry–leading data storage systems
These days, virtually all completely new computers contain SSD drives as a substitute for HDD drives. You’ll find superlatives on them all over the specialised press – that they are a lot faster and operate much better and that they are the future of home pc and laptop computer generation.
Nevertheless, how do SSDs stand up in the website hosting world? Can they be well–performing enough to substitute the tested HDDs? At One Simple Hosting, we’ll help you far better see the distinctions among an SSD and an HDD and choose the one that best suits you needs.
1. Access Time
Because of a revolutionary new solution to disk drive general performance, SSD drives enable for noticeably faster file access rates. Having an SSD, data file accessibility times are much lower (as low as 0.1 millisecond).
HDD drives even now makes use of the exact same basic file access concept that was actually developed in the 1950s. Even though it has been significantly enhanced since that time, it’s slow when compared to what SSDs are offering to you. HDD drives’ file access speed can vary somewhere between 5 and 8 milliseconds.
2. Random I/O Performance
As a result of very same revolutionary solution enabling for a lot faster access times, also you can appreciate greater I/O efficiency with SSD drives. They are able to conduct double as many procedures within a specific time compared with an HDD drive.
An SSD can deal with at least 6000 IO’s per second.
With an HDD drive, the I/O performance steadily enhances the more you use the hard drive. Nevertheless, in the past it extends to a particular limit, it can’t proceed quicker. And due to the now–old concept, that I/O restriction is much less than what you could have with an SSD.
HDD are only able to go as far as 400 IO’s per second.
3. Reliability
The lack of moving components and rotating disks inside SSD drives, and also the recent developments in electrical interface technology have ended in a much better data storage device, having a typical failure rate of 0.5%.
For the HDD drive to work, it should spin a couple metal hard disks at more than 7200 rpm, having them magnetically stabilized in mid–air. There is a large amount of moving components, motors, magnets and also other gadgets loaded in a small location. Therefore it’s no surprise the common rate of failing of any HDD drive ranges among 2% and 5%.
4. Energy Conservation
SSD drives work virtually noiselessly; they don’t produce surplus heat; they don’t require supplemental chilling solutions and use up much less electricity.
Tests have revealed that the common electricity consumption of an SSD drive is somewhere between 2 and 5 watts.
HDD drives can be infamous for becoming noisy; they can be prone to getting too hot and if you have several hard drives within a server, you have to have a further air conditioning device only for them.
In general, HDDs consume between 6 and 15 watts.
5. CPU Power
The quicker the data accessibility rate is, the sooner the data requests will be processed. This means that the CPU will not have to save allocations waiting around for the SSD to respond back.
The normal I/O delay for SSD drives is simply 1%.
Compared with SSDs, HDDs permit not so quick data file access rates. The CPU must lose time waiting for the HDD to send back the inquired file, scheduling its assets in the meanwhile.
The average I/O delay for HDD drives is around 7%.
6.Input/Output Request Times
The majority of One Simple Hosting’s brand new web servers now use just SSD drives. Each of our lab tests have indicated that by using an SSD, the common service time for an I/O request while doing a backup continues to be under 20 ms.
During the same tests with the exact same hosting server, this time equipped out with HDDs, efficiency was much slower. Throughout the server back up procedure, the normal service time for I/O requests varied between 400 and 500 ms.
7. Backup Rates
You’re able to feel the real–world potential benefits to using SSD drives each and every day. As an example, on a web server loaded with SSD drives, a complete backup can take only 6 hours.
Throughout the years, we have utilized mainly HDD drives on our web servers and we are knowledgeable of their overall performance. With a server loaded with HDD drives, a full server back up usually takes about 20 to 24 hours.
Should you wish to without delay boost the efficiency of one’s websites and not having to adjust any code, an SSD–operated web hosting service will be a very good choice. Look at our Linux hosting packages along with our Linux VPS servers – our solutions have quick SSD drives and are offered at inexpensive price points.
Hepsia
- Live Demo
Service guarantees
- Register now. You won’t see any setup costs and you’ll have full root/administrator access to your server. 99.9% network uptime is warranted.
Compare our prices
- Easily examine the resources and tools offered by all of our Virtual Private Servers. Discover exactly which VPS setup will give you just what you will need to handle your dynamic web presence effortlessly.
- Compare our hosting plans
Contact Us
- Get in touch with us 24 hours by email or by utilizing One Simple Hosting’s super–fast ticketing platform. Our technicians are ready to answer any inquiries in up to 60 mins.